Spa Pipe Cleaner
SPA MINERAL OUT is a liquid cleaner used to remove scale and calcium buildup in the pipes of spas, hot tubs and whirlpools.
Benefit
- Removes scale and calcium buildup in pipes
Format: 500 mL
SPA MINERAL OUT
Description
Pour directly over the surface of the water in the spa, hot tub or whirlpool.
SPAS, HOT TUBS AND WHIRLPOOL BATH TUBS:
Do not drain hot tub or spa before cleaning. Remove the rubber headrests to avoid damaging them.
- Pour SPA MINERAL OUT according to the application method and recommended dosage.
- Run pump on high speed for one hour.
- Drain water from hot tub or spa and rinse well with cold water to eliminate all debris.
- For spas and hot tubs, refill and balance water parameters according to the instructions on the products used.
Pour 250 mL of SPA MINERAL OUT per 1,000 L of spa, hot tub or whirlpool bath tubs water.
| SPA / HOT TUB / WHIRLPOOL SIZE | 250 L | 1,000 L | 1,500 L |
|---|---|---|---|
| INITIAL DOSAGE | 50 mL | 250 mL | 375 mL |
- DO NOT open air controls while cleaning.
- DO NOT apply the product when people are in the spa, hot tub or whirlpool.
It is recommended to repeat the procedure under Instructions every 2 to 3 months or as required.
Reviews
There are no reviews yet.