ALL OUT ULTRA 4 IN 1

Pour the required amount of ALL OUT ULTRA 4 IN 1 into the pool in front of the water return outlet.

• Stop the filtration system and put the filter in the Recirculate (or Whirlpool) position.
• Add ALL OUT ULTRA 4 IN 1 according to the application method and recommended dosage.
• Restart the system.
• Run the filter in the Recirculate (or Whirlpool) position for 6 hours to disperse the product.
• Shock the pool water according to the label instructions of the product used.
• Wait 60 minutes before using the pool.
• Resume filtration and let filter run for a minimum of 24 hours.

• For slightly cloudy water: Add 80 mL of ALL OUT ULTRATM 4 IN 1 per 10,000 L of pool water.
• For extremely cloudy water: Add 160 mL of ALL OUT ULTRATM 4 IN 1 per 10,000 L of pool water.
• For coloured water: Add 150 mL of ALL OUT ULTRATM 4 IN 1 per 10,000 L of pool water.
• For enzymes: Add 150 mL of ALL OUT ULTRATM 4 IN 1 per 10,000 L of pool water.
• For phosphates: Add 60 mL of ALL OUT ULTRATM 4 IN 1 per 10,000 L of pool water to lower phosphate level by 0.1 ppm within 48 hours.
• For preventive weekly treatment: Add 25 mL of ALL OUT ULTRATM 4 IN 1 per 10,000 L of pool water.

• Compatible with salt systems.
• DO NOT apply the product when people are in the pool.
• Must be followed up with a shock treatment to activate the clarifier.
• It is not recommended to use this product with a diatomaceous earth filter.

EXTREMELY CLOUDY WATER 640 mL 1 L
COLOURED WATER 600 mL 1 L
ENZYMES TREATMENT 600 mL 1 L
PHOSPHATES TREATMENT 240 mL 480 mL
WEEKLY DOSAGE 100 mL 200 mL