Chlorinating granules

CHLOR is a non-stabilized chlorine sanitizer for pool water. Its chlorine-based formula disinfects water by efficiently destroying bacteria and algae. CHLOR is not stabilized and must be used in combination with STAB to withstand the sun’s ultraviolet rays.


  • Controls bacteria and algae in pool water

Formats : 5 kg, 10 kg and 18 kg

Find a dealer
download our app

SKU: 3007200 Categories: , ,


Maintain proper daily levels as determined by testing kit.
Free available chlorine: 1.0 – 3.0 ppm
pH: 7.2 – 7.8
Total alkalinity: 80 – 120 ppm
Calcium hardness: 200 – 300 ppm

To minimize bleaching, predissolve required amount of CHLOR in a plastic pail with concentration not exceeding 1 kg per 10,000 L of pool water. Always add chemical to water, NEVER water to chemical. Pour resulting slurry directly into pool water.

  • Initially, superchlorinate pool water by adding 150 g of CHLOR per 10,000 L of pool water. For best results, superchlorinate at dusk.
  • Maintain proper chlorine residual by pouring around the pool, directly on the surface of water, 30 g of CHLOR per 10,000 L of pool water, daily or as needed.
  • Superchlorinate weekly with 150 g of CHLOR per 10,000 L of pool water when average daily temperature is between 25°C and 32°C. Otherwise, superchlorinate every other week.
  • For visible algae, superchlorinate using 350 g of CHLOR per 10,000 L of pool water. Heavy algae infestation may require dosages up to 500 g per 10,000 L of pool water. Vacuum pool when dead algae settle.

POOL SIZELess than 40,000 L40,000 L to 80,000 L
ROUTINE DOSAGE (daily)120 g240 g

  • Hot weather, heavy pool usage and rain may require higher usage rates to maintain proper chlorine residuals.
  • For outdoor pools, chlorine residuals can be protected from destruction by sun’s rays by the addition of STAB.


There are no reviews yet.

Be the first to review “CHLOR”

Your email address will not be published.

Go to Top